Kenwood PS-430

The Kenwood PS-430 power supply provides 13.8 VDC at 20 amps intermittent (25% duty cycle), 15 amps standard (50% duty cycle) or 10 amps maximum at continuous load. Ripple voltage is less than 20 mW at 13.8VDC 15 A. Input is 120/220/240 VAC 480W. The power supply employs a 6 amp AC fuse and 20 amp DC fuse. The rear panel has a hard-wire Kenwood power cable to connect directly to the TS-430S. There are also “plus” and “minus” terminal outputs (10 amps max). The rear panel has a fan. A snap-down tilt bail is featured on the bottom panel to increase the operating angle. 6.8 x 3.75 x 9.675 inches 15.4 Lbs. (7 kg).

 

таки его уронили и отломались 3 из 4-х ушей крепления мордочки. но все работает, разобрал, почистил от пыли, сделал из крепежа для гипсокартона распорки и собрал обратно